English
| Radio Operation |
5 | Titling Stations |
| |
7 | (Continued) |
5
A
or
ALPINE
Press the Audio Control button to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.
6
Repeat the steps 4 and 5 above to complete the titling. All 8 character positions should be filled. Use spaces where characters are not needed (for example at the end of a 5 character title, use 3 spaces to complete the title).
7
TITLE
ALPINE
Press and hold the TITLE button for at least 3 seconds to record the title.
Notes: • When you want to erase a title, enter the " 
" symbol into all spaces. When the title memory is used up, the display shows "FULL DATA." Storing new station titles after the "FULL DATA" message has been displayed, causes previously stored titles to be erased. The new station titles will replace the old titles beginning with the first one created.
•If the battery lead is disconnected, the memorized titles will be erased.
24
