English

 

In Case of Difficulty

 

 

 

Radio Mode

 

 

Symptom

Cause and Solution

 

 

Unable to receive stations.

No antenna or open connection in cable.

 

– Make sure the antenna is properly

 

connected; replace the antenna or cable

 

if necessary.

Unable to tune stations in the seek mode.

You are in a weak signal area.

Make sure the tuner is in the DX mode.

If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

The antenna may not be the proper length.

Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

Broadcast is noisy.

The antenna is not the proper length.

 

– Extend the antenna fully; replace it if it is

 

broken.

 

The antenna is poorly grounded.

 

– Make sure the antenna is grounded

 

properly at its mounting location.

 

Tape Mode

 

 

 

Output sounds dull.

The tape head needs cleaning.

 

– Clean the tape head.

 

Incorrect Dolby NR in use.

– Check Dolby NR switch setting.

51

Page 50
Image 50
Alpine TDA-7548E, TDA-7547E owner manual Radio Mode