SSI America 9200 user manual Calibrate

Model 9200 Programmable Dual-loop Controller

User Calibration

Highlighting “User Calibration” and pressing the “Enter” key takes you to the following screen.

Calibrate Cold Junction

Enter temperature of terminal

Edit

Calibrate

<-- Back

Skip

Next -->

DONE

Pressing the “Edit” button displays a numeric keypad allowing you to change the Cold Junction value. After enter the new Cold Junction value you must press “Calibrate”. Pressing the “Calibrate” key stores the appropriate value. Pressing the “Done” will return you to the “User Calibration” Screen.

The current value is displayed directly above the bottom row of buttons as Current CJ value: XX.X ° F.

Pressing the “Next ->” key displays the following screen.

Zero Input 1 Range 0

Enter zero voltage (mV)

Edit

Calibrate

<-- Back

Skip

Next -->

DONE

SSi Manual SERIES 9200 44 Programmable Dual-loop