SSI America 9200 user manual 24VDC / 1 AMP Ohms Total IP10 hand protected

Model 9200 Programmable Dual-loop Controller

About This Manual

This instrument is designed to be custom-configured for each specific application and customer need. The applications (addendum’s to the general manual) include atmosphere control, vacuum furnace control and Nitriding control (% Dissociation). Each addendum is application specific showing the specific screens and terminal connections.

Controller Description

The Model 9200 is a multi-loop Proportional Integral Derivative (PID) controller that can be custom configured to control a variety of different applications. General features of this product include:

!The Model 9200 is powered by 24 VDC, not LINE Voltage. Please be careful when connecting power to this controller. Connecting anything other then 24 VDC will cause serious damage.

Approximate Box Dimensions

Power Requirements

Digital Output Rating

Analog Output Load Rating

Controller Enclosure Rating

Number of RS232 Ports

Number of Ethernet Ports

Number of RS485 Host Ports

Number of RS485 Slave Ports

Number of Internal Relays

Number of Analog Inputs

Number of Analog Outputs

Number of Digital Inputs

Number of Control Loops

2.75" x 4" x 4.5" 24VDC, 4 Watts

24VDC / 1 AMP

1000 Ohms (Total)

IP10 – hand protected

One (1)

One (1)

One (1)

Two (2)

Eight (8)

Three (3)

Two (2)

Four (4)

Three (3)

The variety of input and output combinations allows SSi to configure the Model 9200 to control furnace atmosphere (temperature and % carbon), to control vacuum furnaces (temperature and vacuum gauges), and to control nitriding (temperature, % dissociation, and back-pressure). There are special occasions where the three analog inputs have been used to control 3-zones of temperature.

SSi Manual SERIES 9200 5 Programmable Dual-loop