SSI America user manual Model 9200 Programmable Dual-loop Controller

Model 9200 Programmable Dual-loop Controller

The “Do you want to Shutdown the Model 9200 ” screen pops up when you press the “Shutdown” key. Two responses are possible “Yes” or “No”. When you shutdown the ADVANTECH interface, the SERIES 9200 controller is still functioning. You can monitor it by connecting the ETHERNET connection to a laptop computer, using Internet Explorer, and assigning a legitimate IP address.

NOTE: Shutting down the ADVANTECH (Operator Interface) does not “turn-off” the Series 9200. The “shut-down” procedure must be done to remove the “flashcard”.

Indicating “Yes” and pressing the ENT key shows you a typical computer screen with the “start” button in the bottom left-hand corner. You can now turn the power off to the operator interface without upsetting any of the settings. The “No” response returns you to the initial status screen.

Pressing the “login key” takes you to the Numeric Keypad “enter password” screen. Entering the correct password (the default password is “2”) displays the supervisor menu which includes the entire list of menus necessary to configure the Series 9200. These are explained in detail in Chapter 2 – Configuration.

SSi Manual SERIES 9200 15 Programmable Dual-loop