Model 9200 Programmable Dual-loop Controller
Set Menu Security
Pressing the “Enter” key moves you to the screen below.
Highlighting a specific screen (using the Blue up and down Arrows) and pressing the “Enter” key changes the displayed Security Level of the highlighted Screen.
The additional items on the above screen are as follows:
Zone.........................................................................................................................../Load TC Setup | Supervisor |
| |
Port Setup | Administrator |
Instrument Setup | Administrator |
Zone Assignments | Administrator |
Furnace Setup | Administrator |
Default Wait Limits | Administrator |
Furnace Name | Administrator |
Alarm Setup | Administrator |
Relay Assignments | Administrator |
Relay Setpoints | Administrator |
Input Setup | Administrator |
Output Setup | Administrator |
Passcode and Alarm | Administrator |
IP Address | Administrator |
Event Control | Administrator |
Valve Setup (Nitriding Only) | Administrator |
Valve Inputs (Nitriding Only) | Administrator |
Programmer Setup | Administrator |
Recipe Transfer | Administrator |
User Calibration | Administrator |
Full Calibration | Operator |
Set Menu Security | Operator |
Read/Write Raw Data | Administrator |
Tuning Assistant | Operator |
SSi Manual SERIES 9200 | 51 | Programmable |
