Model 9200 Programmable Dual-loop Controller
SSi Manual SERIES 9200 41 Programmable Dual-loop
“Hold Instrument Number” defines the Slave Instrument to be placed in hold (normally used with Soak) if
the Process Variable goes below the value entered in “Hold Minimum PV”, or above “Hold Maximum PV”.
Highlighting your choice to be changed and pressing the “Enter” key moves you to a numeric keypad that
allows you to enter a new value by touching the appropriate keys. Once the you have made the change
pressing the “Enter” key takes you back to the previous screen. Once again pressing the “Esc” key takes
you back to the Event Control screen without making the changes.
“Event for Program Run” defines which Event Contact will start the program identified on the “Event Run
Program Setup” Screen.
“Event for Program Reset” defines which Event Contact will reset the program currently running.
NOTE: this will only reset the program, all setpoints, events, etc, will remain in their last state.