The light illuminates with very low cur- rent, and it does not adversely affect the performance of the driver during use or its battery capacity.
How to use the belt hook
WARNING!
•Be sure to attach the belt hook securely to the main unit with the screw firmly fastened. When the belt hook is not firmly attached to the main unit, the hook may depart and the main unit may fall.
This may result in an accident or injury.
•Periodically check screw for tightness. If found to be loose, tighten firmly.
•Be sure to attach the belt hook firmly and securely onto a waist belt or other belt. Pay attention to the unit not slipping off from the belt.
This may result in an accident or injury.
•When the main unit is held by the belt hook, avoid jumping or running with it. Doing so may cause the hook to slip and the main unit may fall.
This may result in an accident or injury.
•When the belt hook is not used, be sure to return it to the storing position. The belt hook may catch on something.
This may result in an accident or injury.
•When the unit is hooked onto the waist belt by the belt hook, do not attach driver bits to the unit.
A sharp edge object, such as a drill bit, may cause injury or an accident.
To set the belt hook angle position
1.Slide the belt hook lock lever 1 and hold it to unlock the belt hook.
2.Pull the belt hook from 2 storing position 2 and
set it as desired angle. | 1 |
| |
3. Release the belt hook | 3 |
lock lever to lock the |
angle of belt hook.
4.Make sure the belt hook is firmly locked 3. Also make sure the belt hook is firmly locked into position.
•The belt hook cannot be locked in this posi-
tion. Firmly lock it into position before use.
To return the belt hook to the storing position,
Follow step 1. and 2. above, then lower the belt hook.
To secure the lock, follow 3 and 4 above.
To change the belt hook location side
The belt hook can be attached to either side of the unit.
1.Set the belt hook at storing position.
2.Loosen the screw turning it counter- clockwise, using a coin or a flat blade screw driver.
3.Take out the belt hook and insert into the other side of the slot on the main unit.
4.Fasten the screw firmly, turning it clock-
wise.
The belt hook can be taken out from the main unit only when it is at storing position.
Additional Power Control Functions
Quick Reference for Features and Functions
| C |
B | A |
Impact power mode select : A (See p.8.)
→This unit is equipped with impact power mode button.By pressing impact power mode button, soft impact mode, medium impact mode and hard impact mode can be selected (3 settings).
∗Please use this together with digital clutch setting.
Digital clutch : B (See p.9.)
→This unit is equipped with the digital clutch function.
The driver rotation will stop when the set clutch load is reached.
∗Please use this together with impact power mode select.
This digital clutch is not intended for controlling the accuracy of the fasten- ing torque.
Example application not to be used;
- 7 -
