For Appropriate use of Battery pack
Ni-MH Battery pack (EY9201)
•Charge the
•The ambient temperature range is between 0°C (32°F) and 40°C (104°F).
If the battery pack is used when the bat- tery temperature is below 0°C (32°F), the tool may fail to function properly. In that case, charge the battery until charging is completed for appropriate functioning of the battery.
•When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a con- nection from one terminal to another.
Shorting the battery terminals together may cause sparks, burns or a fire.
•When operating with a
Battery Pack Life
The rechargeable batteries have a lim- ited life. If the operation time becomes extremely short after recharging, replace the battery pack with a new one.
Battery Recycling
ATTENTION:
FOR Ni-MH Battery Packs, EY9201
A nickel metal hydride battery that is recyclable powers the product you have purchased.
Please call
Charging
NOTE:
When you charge the battery pack for the first time, or after prolonged storage, charge it for about 24 hours to bring the battery up to full capacity.
Battery charger (EY0110)
1. Plug the charger into the AC outlet.
NOTE:
Sparks may be produced when the plug is inserted into the AC power supply, but this is not a problem in terms of safety.
2.Insert the battery pack firmly into the charger. Battery pack
To AC outlet
Battery charger
3.During charging, the charging lamp will be lit. When charging is completed, an internal electronic switch will automatically be trig- gered to prevent overcharging.
•Charging will not start if the battery pack is warm (for example, immediately after
The orange standby lamp will be lit until the battery cools down. Charging will then begin automatically.
4.When charging is completed, the charg- ing lamp will start flashing quickly in green color.
5.When in any of the conditions that battery pack is too cool, or the battery pack has not been used for a long time, the charging lamp is lit. In this case charging takes longer to fully charge the battery pack, than the standard charging time.
•If a fully charged battery pack is insert- ed into the charger again, the charging lamp lights up. After several minutes, the charging lamp may flash quickly to indicate the charging is completed.
6.If the charging lamp does not light immedi- ately after the charger is plugged in, or if after the standard charging time the lamp does not go off, consult an authorized dealer.
NOTE:
•When charging a cool battery pack (below 5°C (41°F)) in a warm place, leave the battery pack at the place and wait for more than one hour to warm up the battery to the level of the ambient temperature. Otherwise battery pack may not be fully charged.
•Cool down the charger when charging more than two battery packs consecutively.
•Do not insert your fingers into contact hole, when holding charger or any other occasions.
- 11 -
