Mounting the battery
1 Raise the viewfinder.
2 Push the battery straight in, and slide it downward until it clicks into position.
3 Return the viewfinder to its original position.
Removing the battery
While pressing the battery eject button, slide the battery upward to remove.
O Set the POWER switch to OFF, and check that the CAMERA/VCR lamp has gone off before removing the battery.
O Support the battery with your hand to ensure that it will not drop.
Battery eject button
1
23
Supplying power from the AC adapter
1 Raise the viewfinder.
2 Push the
3 Connect the DC cable to the AC adapter.
4 Connect the AC cable to the power outlet.
5 Return the viewfinder to its original position.
CAUTION:
This unit will operate on 110/120/220/240V AC. An AC plug adapter may be required for voltages other than 120V AC.
If a conversion plug is required, consult with your dealer as to which one is to be purchased.
1
2
4 
3
Connect the AC adapter correctly as shown in the figure.
O The battery cannot be charged while supplying power from the AC adapter to the camera recorder.
22
