Setting menus
OTHER FUNCTIONS screen
Item/ | Description of settings | |
(display mode) | ||
| ||
|
| |
|
| |
REMOTE | For setting the operations which are | |
(Camera) | performed using the accessory wireless | |
(VCR) | remote control unit. (See page 20 for the | |
| remote control unit settings.) | |
| VCR1: The operation performed by the | |
| remote control unit which has been set | |
| to be used for VCR1 are accepted. | |
| VCR2: The operation performed by the | |
| remote control unit which has been set | |
| to be used for VCR2 are accepted. | |
| OFF: Operations performed by the remote | |
| control unit are not accepted. | |
|
| |
DV CONTROL | For setting the control method when | |
(Camera) | backup shooting is to be performed by | |
| connecting a component for backup | |
| purposes to the DV connector. | |
| OFF: The component for backup purposes | |
| is not controlled. | |
| EXT: The component for backup purposes | |
| is controlled using the START/STOP | |
| button on the camera recorder. The | |
| images shot by the camera recorder are | |
| recorded by the component for backup | |
| purposes. | |
| However, the camera recorder does not | |
| record the images. | |
| BOTH: The images shot by the camera | |
| recorder are recorded by both camera | |
| recorder and the component for backup | |
| purposes. | |
| CHAIN: When the tape in the camera | |
| recorder approaches the end during | |
| shooting, recording is automatically | |
| commenced by the component for | |
| backup purposes, which has been set to | |
| the recording standby mode. | |
|
| |
DV CMD SEL | For setting the recording operation to be | |
(Camera) | performed by the component for backup | |
| purposes when the START/STOP button | |
| on the camera recorder has been pressed. | |
| REC_P: | |
| The mode is switched between recording | |
| and recording pause. | |
| STOP: | |
| The mode is switched between recording | |
| and stop. | |
| <Note> | |
| Select STOP as the item’s setting if the | |
| component for backup purposes is not | |
| equipped with a recording pause function. | |
|
| |
REC LAMP | For setting the lighting of the tally lamps. | |
(Camera) | OFF: The tally lamps do not light. | |
| FRONT: The front tally lamp (by the | |
| microphone) lights. | |
| REAR: The rear tally lamp (by the | |
| viewfinder) lights. | |
| BOTH: Both the front and rear tally lamps | |
| light. | |
|
|
The underlining indicates the factory setting.
Item/ |
| Description of settings |
|
(display mode) |
|
| |
|
|
| |
|
| ||
|
| ||
BEEP SOUND | For setting the beep tone to ON or OFF. | ||
(Camera) | OFF | ON |
|
| When ON is selected as the setting, the | ||
| beep tone is sounded at the times given | ||
| below. |
|
|
| O When the beep tone is sounded, the | ||
| audio signals from the output connectors | ||
| are muted, and the beep tone is output | ||
| instead. |
| |
| [Beep tone sounds once] |
| |
| OWhen the POWER switch has been set | ||
| to ON |
| |
| OWhen shooting has commenced |
| |
| [Beep tone sounds twice] |
| |
| OWhen shooting has been temporarily | ||
| stopped |
| |
| [Beep tone sounds 10 times] |
| |
| OWhen the cassette tape has not been | ||
| inserted |
| |
| OWhen the cassette tape is in the | ||
| recording pause mode |
| |
| OWhen condensation has formed inside | ||
| the camera recorder |
| |
| OWhen a problem has occurred in the | ||
| camera recorder |
| |
|
| ||
CLOCK SET | For setting the internal calendar of the | ||
(Camera) | camera recorder. |
| |
(VCR) |
|
|
|
|
| ||
TIME SHIFT | For adding the time which was set using | ||
(Camera) | this item to the time of the internal calendar | ||
(VCR) | (to compensate for time differences) for | ||
| display in the viewfinder and on the LCD | ||
| monitor. The clock time after | the | |
| compensation is also recorded on the tape. | ||
| +23h |
| |
| (In |
| |
|
| ||
TAPE PROTECT | When the camera recorder is left on | ||
(Camera) | standby for about 5 minutes in the shooting | ||
| pause mode, it is automatically set to the | ||
| tape | protection mode. Which | tape |
| protection mode is to be established is | ||
| selected using this item. |
| |
| POWEROFF: The camera recorder’s power is | ||
| set to the OFF mode. |
| |
| STBY: The cylinder head is set to the stop | ||
| mode. |
| |
|
| ||
USER FILE | LOAD: The settings stored last in the user | ||
(Camera) | file are loaded. |
| |
(VCR) | SAVE: The user file settings which have |
| |
| been changed are saved. |
| |
| INITIAL: The user file settings are restored | ||
| to the factory settings. |
| |
| O When the LOAD or INITIAL operation | ||
| has been performed, set the POWER | ||
| switch on the camera recorder to OFF | ||
| and then to ON again in order to enable | ||
| the settings. |
| |
|
| ||
HOUR METER | For indicating the total rotational time of the | ||
(Camera) | cylinder head | ||
(VCR) | increments). |
| |
|
|
|
|
46