Scene files
10 The screen shown below appears. Press “;” of the OPERATION lever, and move “1” to YES.
FILE F1:222222
| SAVE |
| H |
| INITIAL | H | |
PUSH MENU TO RETURN
11 The screen shown below appears. Tilt the OPERATION lever in the 4 direction, select YES, and press “;” of the OPERATION lever.
FILE F1:222222
SAVE ?
NO
YES
To return the scene file settings to the factory settings, select INITIAL in step 10, and then perform the same steps 11 to 13.
12 A beep sounds ten times in succession, the following message appears, and the scene file changes are completed.
SAVE
COMPLETED !
13 Press the MENU button three times to release the menu mode.
If the menu mode is released without saving the changes, the original scene file settings will be restored when operation is switched to the VCR mode or the power is turned off.
36
