OPERATION

O P E R A T I O N

Raising/Lowering Stand Up Lift (FIGURE 3)

RAISING THE LIFT. Press the UP (Ï) button on the hand control to raise the lift arms and the patient.

LOWERING THE LIFT. Press the DOWN (Ð) button on the hand control to lower the lift arms and the patient.

NOTE: If the Stand Up Lift is in the full UP position, it may be necessary to pull down slightly on the lift arms before the mast will lower.

EMERGENCY STOP. Press the RED button on the control box IN to stop the lift arms and patient from raising or lowering.

NOTE: Rotate RED emergency stop button CLOCK- WISE until it pops out to disengage.

UP Button

DOWN Button

 

 

Hand Control

 

Red Emergency Stop Button

Control

Box

Press IN to Stop

Rotate CLOCKWISE to

Lift Arms

Disengage Emergency Stop

FIGURE 3 - RAISING/LOWERING

STAND UP LIFT

MOUNTING BATTERY CHARGER (FIGURE 4)

NOTE: Refer to your local regulations concerning proper mounting procedures.

1.Place the battery charger with mounting bracket on the wall at the desired position.

2.With a pencil, mark the MIDDLE hole position.

3.Measure down 16.5 cm from the pencil mark and drill one (1) mounting hole.

4.Install the BOTTOM mounting screw until there is an approximate 3 mm gap between the screw head and the wall.

5.Install the battery charger with mounting bracket onto the bottom mounting screw.

6.Drill the remaining two (2) mounting holes.

7.Install the two (2) remaining mounting screws through the mounting bracket and into the wall. Tighten securely.

8.Plug battery charger into the wall electrical outlet. NOTE: ON LED should illuminate.

Mounting Bracket

Battery Charger with Mounting

(STEP 6)

 

Bracket (STEP 5)

 

 

 

 

 

 

BOTTOM

Mounting

Mounting

 

Screw

Screws

(STEP 4)

(STEP 7)

 

 

 

 

 

 

 

 

 

 

 

FIGURE 4 - MOUNTING BATTERY CHARGER

CHARGING BATTERIES (FIGURE 5)

NOTE: Invacare recommends the battery be recharged daily.

NOTE: An audible alarm will sound (horn will beep) when battery is low.

1.Lift UP on the handle on the top of the battery.

2.Lift the battery UP and OUT away from control box.

WARNING

Make sure there is an audible click when mounting battery on the battery charger to confirm proper mounting. Otherwise, injury or damage may occur. Refer to FIG- URE 5 for correct mounting.

3.Place the battery on the battery charger as shown in FIGURE 5. Make sure there is an audible click.

NOTE: The charge LED will illuminate.When charging is complete, the charge LED will stop illuminating.

8

Page 7 Page 9
Page 8
Image 8
Invacare RPS350-1E manual Mounting Battery Charger Figure, Charging Batteries Figure, Raising/Lowering Stand Up Lift Figure
Page 7 Page 9

RPS350-1E specifications

The Invacare RPS350-1E is a cutting-edge power wheelchair designed to enhance mobility for individuals with disabilities or limited physical abilities. This model is specifically crafted to provide exceptional comfort, stability, and versatility in various environments, whether indoors or outdoors.

One of the standout features of the RPS350-1E is its robust and resilient construction. Built on a strong, durable chassis, the wheelchair is capable of supporting users with a weight capacity of up to 350 pounds. This ensures that individuals of varying sizes can benefit from its advanced design without compromising safety. The RPS350-1E also includes a spacious footplate, which allows for comfortable leg positioning during extended use.

The wheelchair is equipped with advanced seating technology, including a contoured seat cushion that promotes optimal pressure relief and comfort. The adjustable backrest allows users to find their perfect angle for relaxation or support, catering to individual preferences. Additionally, the seat height can be customized to accommodate different user needs, enhancing accessibility and comfort.

Power and performance are paramount in the RPS350-1E, which is powered by high-efficiency brushless motors. These motors not only provide impressive torque but also ensure a smooth and quiet ride, allowing users to navigate various terrains with ease. The wheelchair is integrated with a powerful lithium-ion battery, providing extended driving range and reduced charging time, making it ideal for daily use.

The smart joystick controller offers users precise control over the wheelchair's movements. With programmable settings, users can easily adjust the speed and sensitivity of the joystick to suit their individual needs. Moreover, the RPS350-1E is equipped with advanced safety features such as automatic braking, anti-tip technology, and a robust suspension system, ensuring safe operation on inclines and rough surfaces.

In conclusion, the Invacare RPS350-1E stands out in the power wheelchair market due to its combination of durability, comfort, and advanced technology. Its thoughtful design and user-friendly features make it an excellent choice for individuals seeking a reliable mobility solution that empowers them to achieve greater independence in their daily lives. With its impressive capabilities, the RPS350-1E ensures users can confidently navigate their environment while enjoying unparalleled comfort and support.
Top Page Image Contents