CARE AND MAINTENANCE OF YOUR STAND UP LIFT

CARE AND MAINTENANCE OF YOUR STAND UP LIFT

NOTE: Follow the maintenance procedures described in this manual to keep your stand up lift in continuous ser- vice.

The Invacare Stand Up Lift is designed to provide a maximum of safe, efficient and satisfactory service with minimum care and maintenance.

All parts of the Invacare Stand Up Lift are made of the best grades of steel, but metal to metal contact will wear after considerable use.

There is no adjustment or maintenance of either the cast- ers or brakes, other than cleaning, lubrication and check- ing axle and swivel bolts for tightness. Remove all debris, etc. from the wheel and swivel bearings. If any parts are worn, replace these parts immediately.

If you question the safety of any part of the lift, contact your Dealer immediately and advise him/her of your problem.

LUBRICATION (FIGURE 1)

The Invacare Stand Up Lift is designed for minimum maintenance; however, a six (6) month check should ensure continued safety and reliability.

Keep lift and slings clean and in good working order. Any defect should be noted and reported to your dealer as soon as possible.

The casters MUSTswivel and roll smoothly.Alight grease (waterproof auto lubricant) may be applied to the ball bearing swivel of the casters once a year. Apply more frequently if the casters are exposed to extreme moist conditions.

WEAR AND DAMAGE

It is important to inspect all stressed parts, such as slings and any attachment point for slings for signs of cracking, fraying,deformationordeterioration.Replaceanydefective parts immediately and ensure that the lift is not used until repairs are made.

CLEANING

The sling should be washed regularly in water temperature of 180oF (82oC) and a biological solution. A soft cloth, dampened with water and a small amount of mild detergent, is all that is needed to clean the stand up lift. The lift can be cleaned with non-abrasive cleaners.

ADJUSTING THE BASE (FIGURE 2)

NOTE: The base adjustment should not require any attention other than:

1.Check the squareness of the legs when in the CLOSED position.

2.Place a square on the inside of the legs and base to determine the 90o alignment.

3.Adjustthelinkagerodsuntil90o alignmentisachieved.

Square

Linkage Rods

C A R E

-

M A I N T E N A N C E

Linkage

Rod

Lubricate the Bearings in the Caster Swivels

 

FIGURE 1 - LUBRICATION

FIGURE 2 - ADJUSTING THE BASE

17

Page 17
Image 17
Invacare RPS350-1E manual Care and Maintenance of Your Stand UP Lift, Lubrication Figure, Wear and Damage, Cleaning

RPS350-1E specifications

The Invacare RPS350-1E is a cutting-edge power wheelchair designed to enhance mobility for individuals with disabilities or limited physical abilities. This model is specifically crafted to provide exceptional comfort, stability, and versatility in various environments, whether indoors or outdoors.

One of the standout features of the RPS350-1E is its robust and resilient construction. Built on a strong, durable chassis, the wheelchair is capable of supporting users with a weight capacity of up to 350 pounds. This ensures that individuals of varying sizes can benefit from its advanced design without compromising safety. The RPS350-1E also includes a spacious footplate, which allows for comfortable leg positioning during extended use.

The wheelchair is equipped with advanced seating technology, including a contoured seat cushion that promotes optimal pressure relief and comfort. The adjustable backrest allows users to find their perfect angle for relaxation or support, catering to individual preferences. Additionally, the seat height can be customized to accommodate different user needs, enhancing accessibility and comfort.

Power and performance are paramount in the RPS350-1E, which is powered by high-efficiency brushless motors. These motors not only provide impressive torque but also ensure a smooth and quiet ride, allowing users to navigate various terrains with ease. The wheelchair is integrated with a powerful lithium-ion battery, providing extended driving range and reduced charging time, making it ideal for daily use.

The smart joystick controller offers users precise control over the wheelchair's movements. With programmable settings, users can easily adjust the speed and sensitivity of the joystick to suit their individual needs. Moreover, the RPS350-1E is equipped with advanced safety features such as automatic braking, anti-tip technology, and a robust suspension system, ensuring safe operation on inclines and rough surfaces.

In conclusion, the Invacare RPS350-1E stands out in the power wheelchair market due to its combination of durability, comfort, and advanced technology. Its thoughtful design and user-friendly features make it an excellent choice for individuals seeking a reliable mobility solution that empowers them to achieve greater independence in their daily lives. With its impressive capabilities, the RPS350-1E ensures users can confidently navigate their environment while enjoying unparalleled comfort and support.