Husqvarna Pro 18 AWD manual Replacing the Rear Drive Belt Pro 15 and Pro, Maintenance

MAINTENANCE

Replacing the Rear Drive Belt Pro 15 and Pro 18:

Removal

1. Remove the transmission cover.

2. Unhook the spring on the belt tensioner (A).

3.Remove the hose clip on the middle and the belt guide for the centre belt.

4.Pull off the centre belt from the engine’s pulley and pull out the rear section. A used belt can be pulled downwards. When the belt is new, the centre belt must be pulled off of its front pulley whereupon it can be moved downwards from the engine pulley so that the rear part can be pulled out.

5.Remove the cooling fan (2).

6.Pull the belt off of the hydrostatic transmission’s pulley.

6008-209

A

B

6020-005

8009-364

8009-638

6012-036

36 – English