Husqvarna Pro 18 AWD manual Key To Symbols

KEY TO SYMBOLS

These symbols can be found on the Rider and in the operator’s manual.

Study them carefully so you understand their significance.

Read the operator’s manual.

N

Neutral	Fast	Slow	Engine off	Tyre	Choke	Fuel
				pressures

Oil level Cutting height Reversing Forward Ignition

Use hearing	Hydrostatic free	Parking brake	Warning
protection	wheeling

Noise emission to surroundings in accordance	WARNING!	WARNING! Risk of the	Never drive directly CE conformity marking
with the directive of the European Community. The	Rotating blades	Rider overturning	across a slope
machine’s emission is indicated in the TECHNI-
CAL DATA chapter and on the decal.

Never use the Rider if persons, especially	Never carry passengers on	Do not insert your hands or	Drive very slowly
children or pets, are in the immediate vicinity.
	the Rider or on its tools	feet under the cover when	without the cutting
		the engine is running	unit

Starting instructions

Read the operator’s manual Checking the engine oil level Check the oil level in the hydrostat Lift up the cutting unit Hydrostat pedals in the neutral position

Apply the parking brake.

Use the choke if the engine is cold. Starting the engine

Disengage the parking brake before driving

Accelerator pedal forward

Neutral position

Accelerator pedal reversing

Switch off the engine and remove the ignition cable before carrying out repairs or maintenance

4 – English