Husqvarna Pro 18 AWD manual Replacing the Centre Belt, Maintenance

MAINTENANCE

17. Fit the belt guide for the centre belt.

18. Hook the spring on the belt tensioner.

Replacing the Centre Belt

1.Remove the hose clip in the middle (Pro 15, Pro 18) and the rear belt guide for the centre belt (all machines).

2.Remove the centre belt and fit a new belt.

3.Fit and adjust the belt guide with the lower belt on the engine belt pulley. On Pro 15, Pro 18 also fit the hose clip in the middle as in the figure above.

4.Check and adjust the belt tensioner. This is especially important when fitting a new belt, since stretching of the old belt may have been compensated for by changing the setting of the belt adjuster.

8009-727

8009-637

8009-364

8009-727

8009-401

40 – English