Husqvarna Pro 18 AWD manual Maintenance, Observe caution to avoid trapping your hand

MAINTENANCE

WARNING!

Observe caution to avoid trapping your hand.

8.Lift off the drive belt (1). Now pull out the split pin (2).

9. Pull the frame forwards and refit the pin.

10.Grasp the cutting unit’s front edge, pull out and lift up into the service position.

If the cylindrical bolt, which is now holding the cutting unit is removed, the cutting unit can be lifted off.

Releasing the Service Position

To leave the service position, reverse the procedures set out in ”Placing in the Service Position”. Make sure that the cutting unit’s tongue

(3)enters the loop correctly on the underside of the machine.

1

2

6017-225

6017-226

6017-227

8009-595

50 – English