Husqvarna Pro 18 AWD manual Fuses, Checking the Tyre Pressures, Maintenance, Important Information

MAINTENANCE

Fuses

The main fuse is placed in a detachable holder under the battery case’s cover, in front of the battery.

Type: Flat pin, 15 A.

The fuse for the power outlet is placed under the ignition switch, behind the side plate on the control panel.

Type: Flat pin, 7.5 A.

Do not use any other type of fuse when replacing.

A blown fuse indicates that the mounting has burnt	8009-370
off. Pull the fuse from the holder when replacing.

The fuse is there to protect the electrical system. If it blows again shortly after replacement, it is due to a short circuit, which must be fixed before the machine can be put into operation again.

Checking the Tyre Pressures

The tyre pressure should be 60 kPa / 0.6 bar / 9 PSI on all wheels. The highest permitted pressure is 100 kPa / 1.0 kp/cm2 / 14 PSI).

IMPORTANT INFORMATION

Different air pressure in the front tyres will result in the blades mowing the grass at different heights.

8009-586

6017-100

English – 35