Husqvarna Pro 18 AWD manual Removing the BioClip Plug Combi, Removal of BioClip plug, Maintenance

MAINTENANCE

Removing the BioClip Plug (Combi)

To change a Combi unit from the BioClip function to a cutting unit with rear ejection, remove the BioClip plug, which is located under the unit, attached with three screws.

1.Put the unit in the service position, see ”Placing in the Service Position”.

2.Remove the three screws holding the BioClip plug, and remove the plug.

3.Tip: Fit three full-thread screws M8x15 mm in the screw holes to protect the threads.

4.Return the unit to the normal position.

Fit the BioClip plug in the reverse order.

8009-289

Removal of BioClip plug

52 – English