Husqvarna Pro 18 AWD manual Maintenance

MAINTENANCE

Maintenance		Page	Daily main-		Weekly3)	At least	Maintenance
							interval hours
			tenance		main-	once
							25	50	100	300
			before	after	tenance	a year
	Lubricate the right, rear axle bearing
	Pro 18 AWD	63			●
	Clean the engine’s cooling air intake	31				●	●
	Clean the air filter’s pre-cleaner
	(foamed plastic)	29+30				●	●
	Change the engine oil1)	60				●		●1)	●1)
	Clean the air filter’s filter cartridge 2)
	(paper filter)	29+30				●		●
	Check/adjust the cutting height	45				●		●
	Check/adjust the parking brake	26				●		●
	Inspect the flame proofing/spark arrestor
	(extra equipment)	-				❍		❍
	Replace the engine oil filter (every 200 hours)	62				●			●
	Replace the hydraulic oil filter (every 200 hours)5)	62				●			●
	Clean/replace the spark plugs	32				●			●
	Change the inline fuel filter	28				●			●
	Clean the pulse air filter	28				●			●
	Clean the cooling fins	28				●			●
	Check the play in the engine valves4)	-				❍				❍
	Check the need of an oil change4) and filter
	replacement 5) in the gearbox/hydraulic system	-				❍			❍
	(every 2006)/500 hours)
	Replace the suction filter in the hydraulic tank
	(every 200 hours)6)	-				❍			❍
	Replace the air filter’s pre-cleaner
	(foamed plastic)2)	29+30				●				●
	Replace the air filter (paper filter) 2)
	(every 200 hours)	29+30				●			●
	Perform the 300-hour service4)	-				❍				❍

1)First change after 8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) Maintenance and replacement are required more often in dusty conditions. 3) With daily use, the Rider should be lubricated twice weekly. 4) Performed by an authorised service workshop.

5)Pro 18 only. 6) Pro 18 AWD only. Replace first after 50 hours.

●= Described in this operator’s manual. ❍ = Not described in this manual.

WARNING!

No service operations may be performed on the engine or cutting unit unless:

•The engine has been stopped.

•The ignition key has been removed.

•The ignition cables have been removed from the spark plugs.

•The parking brake is on.

•The cutting unit is disengaged.

English – 23