Husqvarna Pro 18 AWD manual Fitting the Cutting Unit, Maintenance, personal injury

MAINTENANCE

Fitting the Cutting Unit

WARNING!

Wear protective glasses when assembling the cutting unit. The spring that tensions the belt can fly off and cause

personal injury.

1.Place the Rider on a flat surface and apply the parking brake. Check that the lever for setting the cutting height is in the lowest position.

Ensure the anti-scalp roller is fitted on the cutting unit (1).

2.Grasp the handle on the front of cutting unit’s frame (2) and push the unit in under the Rider.

Make sure the tongue (3) on the unit mates correctly.

3.Fit the screw and secure with a locking pin.

WARNING!

Observe caution to avoid trapping your hand.

4.Place the belt over the runner pulley and behind the adjuster pulley.

5.Press down the frame and secure with the split pin. Fit the drive belt around the unit’s drive pulley.

6.Hook in the height adjustment stay.

3

1

2

6017-159

8009-595

6017-120

8009-596

8009-699

English – 43