Husqvarna Pro 18 AWD Pedal Mechanism in Frame Tunnel, Chains in the Frame Tunnel, Lubrication

LUBRICATION

2. Pedal Mechanism in Frame Tunnel

Lubricate the pedal mechanism in the frame tunnel.

Remove the cover of the frame tunnel by loosening the screws (two on the steering servo housing).

Work the pedals and lubricate the moving parts with an oilcan.

Lubricate the cables to the brake and drive pedals with an oilcan.

Lubricate the point ”Chains in the Frame Tunnel” before replacing the cover to the frame tunnel.

8009-505

8009-345

3. Chains in the Frame Tunnel

Remove the cover from the frame tunnel, see point 2.

Lubricate the chains in the frame tunnel with an oilcan or chain lubricant spray for motorcycles.

Lubricate the steering cable pulley axle with grease. Move the pulleys to one side and brush grease on the axle.

Replace the cover on the frame tunnel.

6020-022

English – 57