CLIP

PINCE

PINZA

D3

WHEEL HEIGHT ADJUSTMENT (1-1/4 IN. (32mm)

 

 

 

 

TO 3-1/2 IN. (89mm) FIGURE E

E

 

NOTE: Certain types of grass or grass conditions may require varying the

 

height of the mower deck.

 

 

 

 

1. Before making any adjustments, turn mower off, wait for blade to stop,

 

 

and unplug mower.

 

 

2. Your mower features the Black & Decker single lever wheel height

 

 

adjust system. This system will adjust all four wheels at the same time.

 

 

Mower adjusts from 1-1/4 in. (32 mm) to 3-1/2 in. (89 mm) with six

 

 

increments which are marked on the mower.

 

 

3. Place your left hand on the height adjust handle E1 and your right

 

 

hand on the lower part of the main handle E2.

 

 

4. Pull height adjust handle (E1) away from mower, and re-set in the

 

 

desired height adjust position. Rotating the height adjust handle towards

 

 

the front of the mower lowers the cutting height, and rotating towards the

1

rear raises the cutting height.

 

 

 

RECOMMENDED APPROXIMATE CUTTING HEIGHT

D4

2

The cutting height should be in the higher recommendation for warmer weather, lower for shade areas and for the last mow before winter. Follow the 1/3 rule, never cut off more than 1/3 of the total height of the grass. If lawn is too high to practice this rule, raise the cut height before mowing and then lower to desired height and mow again in a day or so.

OPERATING INSTRUCTIONS

NOTE: A mower is a major appliance and should not be operated simultaneously with other major appliances on the same house circuit.

WARNING: Make sure that other persons and pets are at least 100 feet (30.48 m) away.

Remove all rocks, sticks, wire, toys, bones, and other debris or items which might be thrown by the rotating blade.

ATTACHING EXTENSION CORD TO MOWER (FIGURE F)

DO NOT connect the extension cord to power source until you have finished reading this manual and you are ready to start mowing.

1.The extension cord must be polarized and will only plug in one way, orient the wide slot with the wide blade in the switch housing.

2.Loop the extension cord (F1) and push the loop up through the hole in the switch housing.

3.Pull the extension cord on the side of the loop that is plugged into the switch housing and remove all the slack in this section of the extension cord.

4.Place the loop over the strain relief tab (F2) on the switch housing and pull the extension cord so the loop draws down around the strain relief tab as shown in the detail. Double check to see that you did not loosen the extension cord.

F

2

1

6

Page 5 Page 7
Page 6
Image 6
Black & Decker MM1800 Recommended Approximate Cutting Height, Attaching Extension Cord to Mower Figure F, Clip Pince Pinza
Page 5 Page 7

MM1800R, 90552856, MM1800 specifications

The Black & Decker MM1800 is a reliable, high-performance lawn mower designed to make lawn maintenance efficient and hassle-free. This model stands out for its compact design, making it an ideal choice for small to medium-sized lawns. One of its most notable features is the powerful 18-inch cutting deck, which allows users to cut through grass quickly and effectively. The MM1800 is equipped with a robust electric motor that provides consistent power without the noise and emissions associated with gas-powered mowers.

One of the key technologies incorporated into the MM1800 is the Advanced Cutting System. This system includes a high-performance blade that provides precise cutting for better grass health. Additionally, the mower offers a 3-in-1 cutting capability, allowing users to choose between bagging, mulching, or side discharge options. This versatility helps cater to different lawn care preferences and enhances the overall mowing experience.

The MM1800 also features an adjustable cutting height that ranges from 1 to 3 inches, giving users the flexibility to customize the lawn’s appearance according to their preferences. This adjustment can be easily made with a single lever, making it user-friendly and convenient.

The unit's lightweight design ensures maneuverability around obstacles such as trees and flower beds. Its folding handle allows for easy storage, making it an excellent option for those with limited garage space. Furthermore, the construction of the MM1800 is sturdy, providing durability that is essential for a long-lasting lawn mower.

With safety features like a safety switch and an easy-to-reach control handle, the Black & Decker MM1800 is designed with user safety in mind. It also has low maintenance requirements, as the electric motor means users do not have to deal with oil changes or gas refills.

Overall, the Black & Decker MM1800 is an efficient, versatile, and user-friendly lawn mower that combines powerful performance with modern technology. Its features cater to various lawn care needs while ensuring ease of use and safety, making it a worthy investment for any homeowner looking to maintain a pristine lawn. With models like the MM1800 and its variants, such as the 90552856 and MM1800R, Black & Decker continues to provide quality lawn care solutions for a discerning customer base.
Top Page Image Contents