Black & Decker MULTI-GAS DETECTORS manual Bw Technologies Automatic Test Stations

BW TECHNOLOGIES AUTOMATIC TEST STATIONS

Automatic Full-Function Test Stations

For Zero-maintenance and single gas detectors

Safe and Automatic

Test Stations are engineered for ease-of-use— simply insert the detector into the test well and press the red button. The station first verifies that the detector is installed, then tests the sensor response time, speed of response, alarm activation. Watch the color coded PASS/FAIL advice LED’s as the test quickly progresses. If all tests are successful, the green PASS light activates to confirm the detector is ready for use.

Convenient and Economical

When a test is initiated, the solenoid automati- cally releases test gas to the detector. The flow of gas shuts off automatically when the test is complete, preventing any waste of test gas and protecting personnel form exposure to the gas. The AC adapter allows an unlimited number of units to be tested without the need for battery replacement.

Test Stations can be conveniently hung on a wall to be conspicuous reminder for individuals to test their detectors before entering a poten- tially hazardous area.

Simple and Easy

Simply insert the detector into the test-well and press the red button. Quality test-gases are available of all BW Technologies gas detection instruments.

Automatic full-function Test Stations are an economical solution for companies that use large number of gas detectors. Designed specifically for testing numerous units, Test Stations eliminate the risk of exposing personnel to toxic test-gas by providing a fast, safe and easy method of testing a detector’s response to gas.

•Detector fully tested in 10-30 seconds

•Easy and fully automatic

•PASS/FAIL advice on each test

•Test Stations verify all functions: Sensor response to gas Speed of response Visual LED alarm activation Audible alarm activation

•Economical use of test-gas

•Test Stations come complete with regulator, reinforced Teflon test-hose, AC wall-mount adapter and 9-volt battery

•Over 350 units tested on one 9-volt battery

GAS DETECTION

Ordering Information:

Part No.	Description
GA-TS04	GasAlert 100 test station (for H2S, CO)
GA-TS02	GasAlertClip test station (for H2S, CO, O2)
GA-TS03	GasAlert & GasAlert LEL test station (for single gas detectors)

Accessories:

Test-Gas Cylinders - Order Gas Separately

G0042-H25 25 ppm H2S, balance nitrogen (58L)

G0041-M100 100 ppm CO, balance nitrogen (130L)

G0043-N2 100% nitrogen for oxygen units (103L)

CALL	FAX	CALL US TODAY
800.833.0247	800.282.4365	www.safetyfire.com
281.479.9700	281.479.6321	–375–