BIOSYSTEMS PhD5 ACCESSORIES

Standard Accessories:

Each PhD5 detector is shipped complete with leather case, carrying strap, hand aspirated sample draw kit with 10 feet of tubing, operator’s guide, reference manual, quick reference card, and comprehensive training video. The sample draw kit includes sample draw/calibration adapter, squeeze bulb, tubing, sample probe, and spare sample probe filters. “Alkaline” PhD5 detectors include and alkaline battery pack and set of three AA disposable batteries. “Ni-Cad” PhD5 detectors include a Ni-Cad battery pack and slip-in “Datadock”/Fast Charger as well as a spare alka- line battery pack and set of three AA disposable batteries.

PhD5 Remote Accessories:

Part No.	Description
54-27-0101	Continuous sample pump for PhD5, slip on. Includes 10' of tubing and sample probe assembly.‡
54-27-0102	Continuous sample pump for PhD5, screw on. Includes 10' tubing and sample probe assembly.
54-05-A0401	Sample draw kit for PhD5. Includes adapter, squeeze bulb, 10' of tubing and sample probe
	assembly. Not for use with CI2, CIO2
54-05-A0403	Sample probe assembly. Does not include tubing, squeeze bulb, or sample draw adapter.
54-05-A0405	Sample probe assembly with 11.5 inch stainless steel probe tube. Does not include tubing,
	squeeze bulb, or sample draw adapter
10-263	Sample draw/calibration adapter for PhD5.

PhD5 “Smart Sensors”

Part No.		Description	Range
54-25-80	LEL	Combustible Gas	0-100%LEL
54-25-90	O2	Oxygen	0-30%/Vol.
54-25-01	CO	Carbon Monoxide	0-1000 PPM
54-25-02	H2S	Hydrogen Sulfide	0-200 PPM
54-25-14	Duo-Tox	Dual Channel CO / H2S	CO: 0-1000 PPM
		Provides substance specific readouts for CO & H2S	H2S: 0-200 PPM
54-25-03	SO2	Sulphur Dioxide	0-25 PPM
54-25-21*	HN3	Ammonia	0-300 PPM
54-25-08* **	CL2	Chlorine (non-specific)	0-50 PPM
54-25-18* **	CL2	Chlorine (specific)	0-50 PPM
54-25-12* **	CIO2	Chlorine Dioxide (non-specific)	0-15 PPM
54-25-20* **	CIO3	Chlorine Dioxide (specific)	0-5 PPM

*Special corrosive gas calibration adapter (No. 54-26-0405) required for proper calibration.

**The non-specific CL2 and CIO2 sensors can be used for the detection of both gases. The specific CL2 and CIO2 sensors are designed for the target gas only.

PhD5 Calibration Kit

Part No.	Description
54-27-0501	Calibration Kit for PhD5 includes foam lined carrying case with room for up to three cylinders of
	calibration gas. Kit contains 12-023 regulator and other fittings. Kit does not include gas.

GAS DETECTION

CALL	FAX	CALL US TODAY
800.833.0247	800.282.4365	www.safetyfire.com
281.479.9700	281.479.6321	–379–

Black & Decker MULTI-GAS DETECTORS manual BIOSYSTEMS PhD5 ACCESSORIES, Standard Accessories

Models: MULTI-GAS DETECTORS