90572374 NHT2218 manual REVISED.qxd: chainsaw booklet new 9/19/11 11:50 AM Page 4
6)Service
a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
HEDGE TRIMMER SAFETY WARNINGS
•Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in serious personal injury.
•Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turn off. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
•Carry the hedge trimmer by the handle with the cutter blade stopped. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
•Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring or its own cord. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
•Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the blade.
•DANGER - Keep hands away from blade. Contact with blade will result in serious personal injury.
WARNING: Only use with handle and guard properly assembled to hedge trimmer. The use of the hedge trimmer without the proper guard or handle provided may result in serious personnal injury.
WARNING: Some dust created by this product
contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•compounds in fertilizers
•compounds in insecticides, herbicides and pesticides
•arsenic and chromium from chemically treated lumber
To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially designed to filter out microscopic particles.
The label on your tool may include the following symbols.
V | volts | A | amperes | ||||||||
Hz | hertz | W | watts | ||||||||
min | ............ | minutes | no | alternating current | |||||||
|
|
|
|
|
| direct current | no load speed | ||||
|
|
|
|
|
| ||||||
|
|
|
|
|
| ||||||
|
|
| .............. |
| Class II Construction |
|
|
| .................... | earthing terminal | |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| ............ | safety alert symbol | .../min | strokes | |||
|
|
|
|
|
|
|
|
|
|
| per minute |
COMPONENTS
1. Trigger Switch | 2 | 3 |
2. Lock Button | 5 |
|
3. Switch Handle |
| 1 |
4. Blade Guard | 4 | |
5. Bail Handle |
|
|
6. Charger |
|
|
7. Battery | 8 |
|
8. Blade | 9 | |
9. Blade Sheath |
|
|
7 |
6 |
4
