Using your cooktop
Gas burners
The knob (Fig. 13) controls the flow of gas through the safety valve.
23
Never cook or leave the knob between maximum and O (off). 
Maximum
You can choose to cook at any heat between minimum and maximum
OFF (closed valve)
Minimum
Fig.13 CG705 Burner knob
1
Using the burners
1Choose the control knob for the burner you want to use.
2 Press the knob down gently and turn it anticlockwise to
the maximum position. The ignitors on all the burners will spark.
3 Hold down the knob for approximately 10 seconds after 2 the burner has lit.
Releasing the knob too soon will extinguish the flame.
4Adjust the flame anywhere between the maximum and minimum positions. Do not adjust the flame between maximum and O (OFF).
Note: If the burner does not light within 15 seconds, turn the knob off and wait at least one minute before trying again.
5After use, always turn the knobs to the O (OFF) position.
Fig. 14 Pressing down then turning the burner knob
Flame failure safety feature
The burners have a flame failure probe as well as an ignitor (see Fig 15).
The flame failure probe cuts off the gas supply to the burner if the flame is blown out.
If the flames are accidentally extinguished, turn off the burner and do not try to light it again for at least one minute (to allow the gas to disperse).
