Installation instructions

Electrical connection

19

Important!

This appliance must be earthed.

Installation must be carried out according to the manufacturer’s instructions.

Incorrect installation may cause harm and damage to people, animals or property, for which the manufacturer accepts no responsibility.

If the installation requires alterations to the domestic wiring system, call a qualified electrician. The electrician should also check that the socket cable section is suitable for the power drawn by the appliance. Before carrying out any work on the power section of the appliance, it must be disconnected from the electricity supply.

The plug must be connected to an earthed socket in compliance with safety standards.

Do not use adapters, reducers, a multi-outlet power board or branching devices when connecting this appliance to the mains power supply, as doing so can cause overheating and burning.

The appliance must be connected to the mains power supply checking that the voltage corresponds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.

If the appliance is supplied without a plug, fit a standard plug which is suitable for the power consumed by the appliance.

A suitable isolating switch providing full disconnection from the mains power supply must be incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The switch must be of an approved type and provide a 3 mm air gap contact separation in all poles in accordance with the local wiring rules. The switch or socket must be accessible with the appliance installed.

The power supply cable must not touch any hot parts and must be positioned so that it does not exceed 75°C at any point along its length.

If the power supply cable is damaged, it must be replaced by a cable of the same type. It can only be replaced by the manufacturer, its Service Agent or a similarly qualified person by a in order to avoid a hazard.

As the colours of the wires in the power supply cable of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Colour of power supply cable wire

Colour or mark of plug terminal

Green & Yellow

“E” (Earth) or green or

 

 

 

 

 

 

Blue

“N” (Neutral) or black

Brown

“L” (Live) or red

Power supply cable section

230 V

 

 

 

 

 

 

 

 

 

 

 

 

Type H05V2V2-F, resistant to temperature of up to 90oC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power supply

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

230 V~ 50/60 Hz 3 x 0.75 mm2

L1 PE N(L2)

Fig. 10 Connection diagram

Page 21
Image 21
Fisher & Paykel CG705 Electrical connection, Colour of power supply cable wire, Power supply cable section

CG705 specifications

The Fisher & Paykel CG705 is a state-of-the-art gas cooktop that combines modern design with advanced cooking technology. Designed for today's home chefs, the CG705 stands out with its efficient performance and user-friendly features, making it a perfect addition to any contemporary kitchen.

At the heart of the CG705 are its five powerful gas burners that offer precise control across a wide range of cooking techniques, from simmering delicate sauces to achieving a high-heat sear. The burners provide varying outputs, with the high-speed burner generating 18,000 BTU, enabling chefs to quickly boil water or sear meats, while the dedicated wok burner allows for authentic Asian cooking experiences.

Equipped with a sleek, easy-to-clean surface, the cooktop features a combination of stainless steel and high-quality glass. This not only enhances the aesthetic appeal but also ensures durability in the face of daily use. The continuous grates provide seamless support for pots and pans, making transitioning between burners effortless and safe.

One standout technology employed in the CG705 is the flame failure safety device. This essential feature ensures that if a flame goes out while cooking, the gas supply is automatically cut off, reducing the risk of gas leaks and enhancing safety in the kitchen. Additionally, the cooktop comes with electronic ignition, allowing for swift lighting of burners with just the press of a button.

The CG705 is also designed with user convenience in mind. Its ergonomic control knobs provide easy access and operation, allowing for accurate flame adjustments with precision. The cooktop is compatible with natural gas and can be converted to LPG, offering flexibility for various household setups.

Furthermore, Fisher & Paykel emphasizes energy efficiency in this model, making it an environmentally friendly choice for the conscientious consumer. The cooktop’s design facilitates optimal heat distribution, reducing cooking time and energy consumption.

In conclusion, the Fisher & Paykel CG705 gas cooktop combines modern design, advanced safety features, and high-performance cooking capabilities. Whether for everyday meals or gourmet cooking, this versatile appliance is engineered to meet the demands of discerning chefs, making it a valuable investment for any kitchen.