Installation instructions
Applying the seals
11
1Turn the cooktop upside down and place it on a soft surface.
2Spread the longer seal “A” around the left, rear and right sides (Fig. 3a).
3Using a sharp cutter or a pair of scissors, cut the excess seal “C” and put aside (Fig. 3b).
4 Spread the seal “B” around the left, front and right edges of the cooktop (Fig. 3c).
5 Spread the seal “C” along the rear edge of the cooktop (Fig. 3d), making sure that the beginning and the end overlap at the junctions with seal “B” (Fig. 3e).
Seal A |
| C | Seal B |
Fig. 3a | Fig. 3b |
| Fig. 3c |
Seal C
Seal C
Fig. 3d
SIDE
REAR
Seal B
Seal A
SIDE FRONT
Fig. 3e
