12
Installation instructions
Fastening the cooktop to the bench
1With the cooktop turned upside down, mount the supplied front and rear clamps (F and R) and
screws (S) onto the cooktop, as shown (without tightening the screws).
2Place the cooktop into the cutout, then tighten the screws to clamp the cooktop securely to the bench.
3Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the cooktop. Take care not to damage the benchtop.
Note: if your bench is thicker than 40 mm, recess the underside to between 20 and 40 mm.
Gas inlet pipe
R
R
F
| F | |
Rear side | Front side | |
Seal C | Seal A | |
Seal A | ||
|
20 mm min.
40 mm max.
S |
R
S |
F |
20 mm min.
40 mm max.
Fig. 4 Fastening the cooktop to the bench