90553808 SS12, SS14, SS18 Smart
Page 8
OPERATING INSTRUCTIONS
TRIGGER SWITCH & REVERSING BUTTON (FIGURE D)
•The drill is turned ON and OFF by pulling
and releasing the trigger switch (1). The | D |
farther the trigger is depressed, the higher |
|
the speed of the drill. |
|
• A forward/reverse control button (2) | 2 |
determines the direction of the tool and | |
also serves as a lock off button. |
|
• To select forward rotation, release the |
| |
trigger switch and depress the | 1 | |
forward/reverse control button to the left. | ||
| ||
• To select reverse, depress the |
| |
forward/reverse control button the |
| |
opposite direction. |
| |
NOTE: The center position of the control |
| |
button locks the tool in the off position. |
| |
When changing the position of the control |
| |
button, be sure the trigger is released. |
|
TORQUE CONTROL (SMART SELECT TECHNOLOGY) (FIGURE E)
This tool is fitted with a collar (3) which depicts various drilling and screwdriving applications. They are used to select the operating mode and to set the torque for tightening screws. Large screws and hard workpiece materials require a higher torque setting than small screws and soft workpiece materials.
When the optimal performance selector collar (3) is rotated to any of the images shown in the chart below, the tool shifts to deliver either the recommended torque or speed for that application.
E |
3 |
8 |
