ENGLISH
After use
•Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.
•When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.
Inspection and repairs
•Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
•Do not use the appliance if any part is damaged or defective.
•Have any damaged or defective parts repaired or replaced by an authorised repair agent.
•Before use, check the power supply cord for signs of damage, ageing and wear.
•Do not use the appliance if the power supply cord or mains plug is damaged or defective.
•If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.
•Never attempt to remove or replace any parts other than those specified in this manual.
•Do not attempt to repair the appliance. Take it to your nearest Black &
Electrical safety
This product must be earthed. Always check that the power supply corresponds to the voltage on the rating plate.
•Power plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (Class 1) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Extension cables & Class 1 product
•A
•Up to 30m (100ft) can be used without loss of power.
To avoid the risk of electric shock, do not immerse the cord, plug or appliance in water or other liquid.
•If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Black & Decker Service Center in order to avoid a hazard.
Before first use
•Remove all packaging from the appliance.
•Choose the required supply voltage by sliding the voltage selector to the correct position. (The voltage selector is located on the base of the appliance)
•Clean the appliance before first use.
•Fill the kettle with cold water to the maximum fill mark. Do not over fill as described below.
4
