•Close the lid (1). Boil the water as described below.
•Discard the boiled water and repeat the procedure.
Assembly
Your appliance has a cable tidy clip to enable compact storage when traveling.
To extend the cable for use:-
•Pull the cable release slider (located on the bottom of the appliance). The cable tidy clip
(5)will now be released.
•Lift the cable tidy clip (5) and
•Replace the cable tidy clip to its original position. A click will indicate that the cable tidy clip is secured in its correct position.
Use
Warning! Always place the appliance on a flat, clean and
Warning! Always allow the product and contents to cool before opening the lid /
Warning! Always check the water level before using the appliance. Never use the appliance without sufficient water.
ENGLISH
Warning! Steam may escape from the spout.
•Disconnect the kettle from the power supply before filling or adding water.
•Close the lid (1) after adding or filling water, otherwise the auto
•Do not fill with more than the max level of water or there will be a risk of spillage.
•Connect the kettle to power supply, press the on power switch (2), the indicator light (4) will come on to show the kettle is now functioning.
•When the water has boiled, the kettle will switch off automatically and the indicator light
(4)will go out. The auto
•You can press the off power switch (3) to turn off the kettle during operation.
Pouring boiling water
•Make sure the appliance is switched off.
•To avoid scalding, tilt the kettle slowly to pour the boiled water.
•After pouring, remove the plug from the socket.
Cleaning and maintenance
Before cleaning and maintenance, remove the plug from the socket and allow the appliance to cool.
Warning! Before cleaning and maintenance, switch the appliance off, remove the plug from the socket and allow the appliance to cool.
Warning! Do not immerse the appliance, the cord set or the plug in water or any other liquid.
•Wipe the exterior with a damp cloth.
•Do not use scouring pads.
5
