6

Accessories

A full array of accessories for use with your tool are available from your local
dealer or authorized service center.
CAUTION: The use of any accessory or attachment other than those
recommended in this manual may be hazardous.

ACCESSORY TYPE NOTES USAGE

DEPRESSED Use Guard Use for moderate
CENTER Supplied with metal & masonry
WHEEL Tool removal on flat or
contoured surfaces
SANDING Use for smoothing
DISCS welds, and sharp
edges, and automotive
body parts
WIRE Max. 4" (100mm) Knotted Wheel Use for rust removal
BRUSHES Max. 3" (76mm) Cup Wheel and surface preparation
before painting
* Depressed center grinding wheels must fit within the confines of the guard and
must be rated higher than the recommended speed as marked on the nameplate.
WARNING — To reduce the risk of injury, always use proper guards when
grinding and wear eye protection.

Two Year Quality Guarantee

This product is warranted for two years against any defects in material and
workmanship, If defective, the product will be repaired or replaced free of
charge. Simply provide proof of purchase and return the tool to your place of
purchase. Normal wear or damage due to abuse, mishandling or unauthorized
repair is not covered. This warranty does not apply to accessories, This warranty
gives you specific legal rights and you may have other rights which vary from
state to state.

30 Day Satisfaction Guarantee

If, for any reason, you are not completely satisfied with the performance or
results of this product, within thirty days of original purchase, it will be repaired
or replaced free of charge. Simply provide proof of purchase and return the tool
to your place of purchase.
If your tool requires out of warranty repairs, you may send or take your tool to a
Black & Decker owned Service Center. Black & Decker Service Centers are listed
under “Tools-Electric” in the yellow pages of the phone directory or you may call
1-800-544-6986 for information on your nearest Service Center.
TruServ

8600 W. Bryn Mawr Ave.

Chicago, IL 60631-3505

ENGLISH
*TV800 / 386239 11/18/03 11:36 AM Page 6