Black & Decker UCM200WG manual Care and Cleaning, Hints For Best Results, Cleaning Instructions

Models: UCM200WG

1 17
Download 17 pages 45.48 Kb
Page 13
Image 13
Hints For Best Results

Hints For Best Results

A clean coffeemaker is essential for making great tasting coffee. Regular cleaning, as specified in the CARE AND CLEANING INSTRUCTIONS, is highly recommended.

Always use fresh, cold water in your coffeemaker.

Do not add less than 4 cups (20 ounces) of water to the water reservoir.

Do not add more than 8 scoops of whole bean coffee to the mill basket.

The coffee Mill is intended for COFFEE ONLY. Never grind any other food products or spices in the coffee mill.

Store coffee in a cool, dry place. Once coffee has been opened, keep it tightly sealed in the refrigerator to maintain freshness.

Do not re-use coffee grounds.

Reheating coffee is not recommended. Coffee is at its peak flavor immediately after brewing.

Care and Cleaning

This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.

Cleaning Instructions

Note: Do not place anything other than water or the vinegar cleaning solution specified in this manual into the water reservoir.

1.To clean your coffeemaker after brewing, be sure the coffeemaker is turned OFF, unplugged and cool.

2.Wipe the outside of your coffeemaker and the warming plate with a soft, damp cloth and dry. Do not use abrasive cleaners or scouring pads.

3.Hand wash mill basket, mill lid, carafe lid and carafe in warm, sudsy water.

DO NOT PLACE IN DISHWASHER.

Warning: Never immerse the coffeemaker body in water or other liquid.

Warning: Rinse water reservoir with cold water periodically. NEVER use a cloth to clean or dry the water reservoir as the cloth will leave a lint residue and may clog and cause damage to your coffeemaker.

Mineral Deposits / Decalcifying

Mineral deposits left by hard water can clog your coffeemaker. excessive steaming or a prolonged brewing cycle are signs that a cleaning is needed. Cleaning is recommended every 60 brewing cycles.

How To Decalcify Your CoffeeMaker

1.Pour white into the carafe up to the 6-cup mark. Add cold water up to the 10-cup mark. Pour the water/vinegar mixture into the water reservoir and place empty carafe onto the warming plate.

2.Insert the mill basket and lid into place. DO NOT USE COFFEE!

3.Press the mill button Care and CleaningCleaning Instructions to turn the grinding blades off. The mill indicator light will appear.

4.Press the power button Mineral Deposits / Decalcifying to begin the cleaning cycle.

5. When the cycle is finished, press the power button How To Decalcify Your CoffeeMakerManual background to turn the coffeemaker OFF. Carefully remove the carafe and place on a heat resistant surface.

6.Wait 15 minutes. Pour the same vinegar / water solution back into the water reservoir and replace the carafe back onto the warming plate.

7.Repeat steps 3 and 4 above.

8. When the brew cycle is finished, press the power button

to turn the

coffeemaker OFF and discard the solution.

 

9.To Rinse: Allow the coffeemaker to cool for 15 minutes. Fill the carafe with cold fresh water. Pour the water into the water reservoir and replace the

carafe onto the warming plate. Press the mill button Manual background to turn the

grinding blades off. Press the power button Manual backgroundManual background . When the brew cycle is complete, discard the water. Repeat this step with another carafe of fresh water. Discard the rinse water.

10.Wash and dry all removable parts. Wipe the exterior of the coffeemaker with a damp cloth.

23

24

Page 13
Image 13
Black & Decker UCM200WG Care and Cleaning, Hints For Best Results, Cleaning Instructions, Mineral Deposits / Decalcifying