Black & Decker manual Technical data WV1400

Clean the Vacuum Cleaner body with a damp cloth & allow it to dry thoroughly before using it again. Do not use any abrasives.

Fig. O - Cleaning the filter

The filter is re-usable and should be cleaned regularly. The dust filter is located on the motor unit and protects the motor from dust. To reach this filter, lift both latches to the open position & lift the motor unit from its location. Rotate the cap at the bottom of the filter in an anti- clockwise direction & remove it. The filter can then also be removed.

Clean the filter. Shake off excess dust by tapping the filter into a suitable container. Attention: Dry vacuuming must not be carried out without the dust filter fitted.

Warning! Do not use a brush or compressed air to clean the filter.

Figs. O, T, & U - Changing the filter

The dust filter is located on the motor unit and protects the motor from dust. To reach this filter, lift both latches

(8)to the open position & lift the motor unit (1) from its location. Rotate the cap at the bottom of the filter in an anti-clockwise direction & remove it. The filter can then also be removed and a new one fitted.

Replace the motor unit & fasten the latches. Attention: Dry vacuuming must not be carried out without the dust filter fitted.

Hints for optimum use

Helpful Hints

•Do not immerse the appliance, cord set or plug in liquids.

•Do not block the vents.

•Avoid inhaling dust when emptying the dust bag.

•Always keep the brush, crevice tool and other accessories away from the body while the unit is in operation.

•Always empty the appliance outside.

•Use extra care when cleaning stairs. Always start at the bottom stair & work up.

•Use caution when vacuuming at top of stairs, near children, etc.

•Always be aware of the position of the power cable and hose so as to avoid a tripping hazard during use.

•Do not use this appliance on animals.

•Disconnect the product from the electrical supply before emptying, cleaning or carrying out any maintenance on the appliance.

Technical data
	WV1400
Voltage (Volts)	230
Power input (Watts)	1400 W. Max
Cable length (metres)	5.0
Carton size (litres)	405x400x500 mm
Weight (kilograms)	9 Kg

When vacuuming stairs, always start at the bottom and work your way up. Position the appliance on the floor and do the stairs until halfway. Then carry the appliance to a stable position which is at least one stair below your working position, and do the top half of the stairs.

Carrying the appliance

During use the appliance can be carried using the handle (2).

Fig. V - Storing the appliance

Warning! When storing the appliance, switch the appliance off and unplug it. Make sure that the cord (3) is correctly stored. Place the appliance in an upright position. Always store the appliance in a dry location.

Clean the Vacuum Cleaner body with a damp cloth & allow it to dry thoroughly before using it again. Do not use any abrasives.

Maintenance

Continuous satisfactory operation depends upon proper appliance care and regular cleaning. Clean the Vacuum Cleaner body with a damp cloth & allow it to dry thoroughly before using it again.

Do not use any abrasive or solvent-based cleaner. Do not immerse the appliance in water. Regularly clean the ventilation slots in your appliance using a soft brush or dry cloth.

Warning! Before cleaning and maintenance, switch the appliance off and unplug it from the electrical supply. -6-

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose it off with other household waste. Make this product available for separate collection.

Separate collection of used products and

packaging allows materials to be recycled and used again. Use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. A list of authorised Black & Decker repair agents and full details of our after-sales service and contact are available on the Internet at: www.2helpU.com