Intended Usage
This Micro system is intended exclusively for the playback of audio CDs, MP3/WMA CDs,
Contents
1Micro system
2Speakers
2 Speaker cables
1Remote control (incl. 3 V battery,
1Operating manual
Technical Data
Rated voltage: | 230 V~, 50 Hz |
Power consumption: |
|
In standby | 1.55 Watt |
in operation | max. 26.5 Watt |
Music output: | 2 x 2 Watt RMS |
Radio frequency range: MW (AM): 526.5
The technical details of the device allow for an adjustable frequency range outside of the receivable MW (AM) 526.5- 1606.5 kHz, and/or FM (USW) 87.5 - 108 MHz frequency ranges. In some countries, different national regulations may apply to the assigned radio frequency ranges. Please note that information received outside of the assigned radio fre- quency ranges may not be exploited, passed on to third par- ties or otherwise misused.
USB port
Readable storage mediums: USB1.1 and 2.0 up to
| a capacity of 32GB |
CD player: | Laser class 1 |
Playback formats: | CD, |
| CDs |
Cassette: | Standard cassette |
| |
Tape speed: | 4.75 cm/sec. |
Headphones output: | 3.5mm Jackplug |
Maximum |
|
output voltage: | 137 mV |
Remote Control |
|
Battery: | 1 x 3 V Type CR 2032 |
Measurements (W x H x D): |
|
Main device: | 15.4 x 22.2 x 20.4 cm |
Per speaker: | 13.7 x 21.9 x 12.5 cm |
Weight |
|
Main device: | approx. 2 kg |
Per speaker: | 690 g approx. |
Operating temperature: | 5° - 40°C |
Storage temperature : | |
Protection class: | II / |
Subject to technical changes.
Safety instructions
•These operating instructions are the basis for any handling of the device and must be kept in the immediate vicinity of the device.
•This device is not intended for use by individuals (including children) with restricted physical, physiological or intellec- tual abilities or deficiencies in experience and/or knowl- edge unless they are supervised by a person responsible for their safety or receive from this person instruction on how the device is to be used. Children must be supervised to ensure that they do not play with the device.
•Check the device and all parts for visible damages. The safety concept can work only if the device is in a faultless condition.
Risk of explosion!
•Do not throw batteries into a fire.
•Do not recharge the batteries.
•Never open batteries, never solder or weld batteries. The risk of explosions and injuries exists!
•Regularly check the condition of the batteries.
Leaking batteries can cause damage to the remote control or to the device.
•If you do not intend to use the device for an extended period of time, remove the batteries.
•If batteries have leaked put on protective gloves and clean the battery compartment with a dry cloth.
Risk of electrical shocks.
•Connect the device to an electrical wall socket with a mains voltage of 230 V ~ /50 Hz.
•Do not operate the device if the connection cord or the power plug is damaged.
•The connection cord or device should be immediately re- paired or exchanged by the customer service department if they fail to function faultlessly.
•Never submerse the device in water. Wipe it only with a slightly damp cloth.
•Do not expose the device to rain and never use it in a humid or wet environment.
•Make sure that the power cord does not become wet dur- ing operation.
•You must not open the device housing or attempt to repair the device yourself. There is invisible radiation inside the device (Class 1 Laser) Furthermore should you do so, the safety concept of the device may be compromised and the warranty becomes void.
•Do not place objects containing fluids, e.g. flower vases, on or near the device.
- 2 -
