Model AC504A &
1.3Features
•Eliminates the need for bulky , expensive and hard to build
•Amplifies the signal for clean and crisp transmission
•Differential signaling eliminates ground loops and noise
•Handles resolutions up to 1600x1200 at any refresh rate
•Rugged, Reliable, Compact size
•Only one end requires power in most applications. Power supply can be connected at the sending or the receiving end, whichever convenient.
•Drive standard CAT5 cables to 500 feet (for VGA and Component video versions) or to 1200 feet for (Composite Video and Stereo Audio version)
•Perfect for Remote Monitoring, Video Staging, Conference Rooms, Classrooms,
2. Installation
1.Connect the VGA in
Receiver | ||
Sender |
| |
VGA | VGA | |
Remote Monitor | ||
|
Figure 2.1
2.Connect the included power adapter to the power connector on either of the transmitter or the receiver (for more information, please see the recommendations immediately following this paragraph). Be sure to insert the power connector fully. Check the red light next to the RJ45 connector to verify unit’s power. When the two units are connected Via CAT5 cable, the LED’s at both ends should be lit.
6 |