Installation
1.Turn off the PCs and monitors.
2.Connect the
3.Connect the
4.Connect the power cord and turn on the video matrix.
5.Turn on the PCs and monitors.
6.Control front panel switch to obtain the image either come from PC ○A (Linked LED “○A ” on) or PC ○B (Linked LED “○B ” on) or just switching off. (Linked
LED “○A ○B ” off)
Note:
All the “Video Out” ports will connect with the “Video In” port of ○A while turning on the video matrix.
If you install the DDC monitor for the video matrix, the rest of monitors must be the same resolution as the DDC monitor.
Through the functionality of DDC monitor, the “Video In” port of ○A will connect with the “Video Out” port 1 and the “Video In” port of ○B will connect with the “video out” port 2.
Available monitors include the VGA, SVGA, XGA, Multisync, and exclude the CGA, EGA, Mono.
Operation for cascade:
1.The function to display image on more monitors, you request to attach another video matrix or the standard video splitter.
2.Connect the
Note:
Even though you are allowed to cascade the video matrix with varied ports, the image might become unstable if cascade too many tiers of video matrixes.
P.S.: The example cascades the 4 and 8 ports video matrix; however, you can cascade the video matrix with demanded port.
Trademarks:
All the companies, brand names, and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companies.
© Copyright 2004. Black Box Corporation. All rights reserved.
1000 Park Drive · Lawrence, PA