Manuals / Black Box / Computer Equipment / Switch

Black Box ACS236A manual Configuring the ACS235A

Models: ACS236A ACS235A

1 103
Download 103 pages 46.58 Kb
Page 64
Image 64

CHAPTER 3: Configuring the ACS235A

3. Configuring the ACS235A

This chapter describes how to configure the PC model of the ServSwitch™ Brand Fiber KVM Extender (ACS235A). If your Extender is the Sun model (ACS236A), see Chapter 4.

3.1 Configuring for RGB Video

In normal configuration at delivery time, the Extender units are configured to carry video from a VGA source to a VGA monitor. But if you’d like to attach RGB equipment (either an RGB source or an RGB monitor or both) to your Extender system, this section discusses how you might need to set the units’ configuration jumpers. (See Table 3-1 on page 15 for a full layout of this.) Of course, RGB video can come in a variety of signal forms and combinations. If after reading the rest of this section you’re not sure how to get your RGB application working (or even whether it can be done), call Black Box for technical support.

NOTE

In any application involving RGB video, if the picture on your monitor looks OK with AGC ON, leave the Local Module’s JP3 jumper and the Remote Module’s JP8 jumpers in their factory settings. Otherwise, remove JP3 at the Local Module and move JP8 at the Remote Module to turn AGC OFF. You will then have to adjust the gain of the Extenders’ video signal manually. See Sections 3.2.3 and 3.3.2.

3.1.1VGA VS. RGB SIGNALING

VGA uses two video-synchronization signals, HSYNC (horizontal sync) and VSYNC (vertical sync). In its factory-default settings, the Extender’s Local Module receives these signals from the CPU and overlays them on the color signals for transmission to the Remote Module: HSYNC on green, VSYNC on blue, and SYNCPOL (the combined HSYNC and VSYNC polarity information) on red. But most RGB applications use a single CSYNC (composite sync) signal overlaid on the green color signal instead, so for such applications you’ll need to have the Local Module substitute this signal for HSYNC, as well as create its own SYNCPOL information for use by the Remote Module. Then you might have to set the Remote Module to process these signals properly at the other end.

3.1.2VGA VIDEO CARD TO RGB MONITOR (VGA TO RGB CONVERSION)

To connect a CPU that outputs VGA video to an RGB monitor, remove the Local Module’s JP2 jumper (so that it generates the CSYNC signal needed by the RGB monitor), but leave the JP6, JP10, and JP11 jumpers in their factory-default settings (see Sections 3.2.1 and 3.2.2). At the Remote Module, install jumpers at

13

Page 63 Page 65
Page 64
Image 64
Black Box ACS236A manual Configuring the ACS235A
Page 63 Page 65

ACS236A, ACS235A specifications

The Black Box ACS235A and ACS236A are advanced video and audio extenders designed to facilitate the transmission of high-quality multimedia signals over long distances, utilizing standard Ethernet infrastructure. These devices are essential for professional audio-video applications, such as conference rooms, classrooms, and broadcast studios, where reliable and high-definition signal distribution is crucial.

One of the standout features of the ACS235A and ACS236A is their support for high-definition video formats, including 1080p and 4K resolutions. This capability ensures that users can experience stunning visuals without degradation, even when transmitting over extensive distances. Both models utilize HDBaseT technology, which enables the transmission of uncompressed HD video, audio, control signals, and power over a single Cat5e/6 cable. This simplifies installation and reduces cabling costs while providing exceptional performance.

The ACS235A is equipped with HDMI input and output, making it ideal for connecting a variety of devices such as projectors, monitors, and media players. Its compact design allows for easy integration into existing setups without occupying excessive space. Additionally, it supports Power over Ethernet (PoE), meaning that it can receive power through the same cable that carries the data, enhancing flexibility in deployment.

Similarly, the ACS236A provides comprehensive support for audio and video formats and includes additional features such as RS-232 and IR control. This capability allows users to manage their equipment remotely, making it easier to control presentations or switch between multiple sources. The built-in LED indicators provide real-time status updates, making it simpler for users to monitor the system’s operation.

Both models are designed with durability in mind, incorporating robust housings and reliable connectors that ensure longevity even in demanding environments. Furthermore, they both support a wide range of operating temperatures, making them suitable for various installations, from corporate settings to educational institutions.

In summary, the Black Box ACS235A and ACS236A are powerful audio-video extenders that combine advanced technology with user-friendly features. Their ability to deliver high-quality signals over significant distances, along with remote control capabilities and efficient designs, makes them an excellent choice for anyone looking to enhance their multimedia installations.