CAMPUS PAGER
|
| CONTENTS |
|
1. | Specifications | 6 | |
2. | Important Notes | 7 | |
3. | Introduction | 8 | |
| 3.1 | Overview | 8 |
|
| 3.1.1 Unpacking the Campus Pager (Base Unit and |
|
|
| Two Pagers) | 8 |
|
| 3.1.2 Unpacking the Campus Pager (FX810A) | 8 |
| 3.2 | Tone Pager (FX801A) | 10 |
|
| Unpacking the FX801A | 10 |
| 3.3 | Vibrating/Tone Pager (FX802A) | 11 |
|
| Unpacking the FX802A | 11 |
4. | Installation | 12 | |
| 4.1 | Positioning the Campus Pager | 12 |
| 4.2 | Positioning the Antenna Ground Wire | 14 |
| 4.3 | Connecting Power to the Campus Pager | 14 |
| 4.4 | Installing/Replacing Pager Batteries | 15 |
5. | Using the Campus Pager | 17 | |
| 5.1 | Overview | 17 |
| 5.2 | Storing the System Code | 17 |
| 5.3 | Storing the Pager Code | 19 |
| 5.4 | Transmitting a Message Code to a Single Pager | 20 |
| 5.5 | Transmitting a Message Code to All System Pagers | 21 |
| 5.6 | Receiving a Message Code with the Tone Pager | 22 |
| 5.7 | Receiving a Message Code with the Vibrating/Tone |
|
|
| Pager | 22 |
| 5.8 | Reviewing Stored Message Codes | 22 |
6. | Service Information | 23 | |
8
