CAMPUS PAGER

2.Turn the Campus Pager over and locate the system code button, which is inside the hole labeled SYSTEM CODE. Insert a pointed object such as a straightened paper clip and press the button (see Figure 5-5). The TRANSMIT display will show the previous system code for about one second, then shows ___.

Figure 5-1. The Campus Pager system code button.

3.Enter a three-digit system code. After about one second, the display shows

___, and the system code is stored.

4.If you enter a wrong code, reset it by pressing A/C, CANCEL, or the system code button. Then repeat Steps 2 and 3 to store the system code again.

NOTE

If your application requires more than 100 system pagers, you can use multiple Campus Pager systems. If using more than one Campus Pager, each system should have a unique system code.

21

Page 19
Image 19
Black Box FX810AE, FX801A, FX802A, FX800AE manual Campus Pager system code button