Black Box JPM816A-HD, JPM820A-HD specifications Category 6 High-Density Feed-Through Patch Panels

Category 6 High-Density Feed-Through Patch Panels

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

1. Specifications

Standards: TIA/EIA 568B.2-1, Category 6

Connectors: JPM816A-HD: (48) shielded RJ-45 on front; (48) shielded RJ-45 on back;

JPM820A-HD: (48) unshielded RJ-45 on front; (48) unshielded RJ-45 on back

Size: Panel including cable management: 1.75"H (1U) x 19"W x 6"D (4.4 x 48.3 x 15.3 cm)

Weight: JPM816A-HD: 3.8 lb. (1.7 kg);

JPM820A-HD: 3.3 lb. (1.5 kg)

2. Overview

The Category 6 High-Density Feed-Through Patch Panels meet Category 6 performance requirements and provide patching with- out punching down the wires to the ports. These sturdy panels install in relay racks or communications cabinets.

Your package should include the following items. If anything is missing or damaged, please contact Black Box at 724-746-5500.

•(1) Category 6 High-Density Feed-Through Patch Panel

•(4) 10-32 cuphead screws

•(4) 12-24 cuphead screws

•(8) cable ties

•(4) drain wires (with shielded panel [JPM816A-HD] only)

•(8) station ID labels

3. Installation

Use the High-Density Feed-Through Patch Panels in relay racks. They neatly organize and support the data cables you’ve installed in the rear of the patch panel.

Follow these steps to install the patch panel in a relay rack or communications cabinet:

1.Find an empty rack space.

2.Install the panel with the supplied 10-32 or 12-24 cuphead screws.

3.Install the RJ-45 patch cables on the front and rear connectors. Make sure the rear patch cables are resting on the cable management bar.

Page 2 724-746-5500 blackbox.com