Black Box JPM820A-HD, JPM816A-HD specifications Completed installation

Category 6 High-Density Feed-Through Patch Panels

4.When using the shielded High-Density Feed-Through Patch Panels, make sure to attach the necessary drain wires. Use one drain wire for each shielded module on the patch panel. Attach the drain wire in either of the two places as shown in Figure 3-1. Connect the other end of the drain wire to proper ground.

Lower right view

Top left view

Figure 3-1. Drain wire installation options for shielded models.

5. Use cable ties to secure the cables to the cable management bar. See Figure 3-2.

Figure 3-2. Completed installation.

We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.”

You’ll be live with one of our technical experts in less than 20 seconds.

Page 3