Black Box KV1108A, KV1116A 3.6 Connecting the CAT5 cables , 3.7 Connecting the KVM console , 3.8 Connecting the power supply , 3.9 Resetting the Switch

3. Installation
13
To USB Port
To Video Card
CAT5 cable to ServSwitch
Panther Computer port
SAM
Figure 6 USB SAM
3.6 Connecting the CAT5 cables
1. Connect one connector to the SAMs RJ45 port.
2. Connect the other connector to one of the ServSwitch Panther’s Computer ports.
3. Follow the above 2 steps for each computer.
3.7 Connecting the KVM console
To connect a KVM console to the ServSwitch Panther:
1. Connect the monitor’s connector to the ServSwitch Panther’s Monitor port.
2. Connect the keyboard’s connector to the ServSwitch Panther’s Keyboard port.
3. Connect the mouse’s connector to the ServSwitch Panther’s Mouse port.
3.8 Connecting the power supply
1. Connect the ServSwitch Panther to the power supply using the Power cable
provided. Use only power cord supplied with the unit.
2. Switch on the computers.
3.9 Resetting the Switch
To reset the Switch press the 2 front panel Select buttons simultaneously. The SAMs
are unaffected by this reset.
Resetting can also be performed through the software – explained later.