Chapter 3: Installation
3. Installation
3.1 Installation Steps
1.Connect the ServSwitch CX or CX Uno to the RJ-45 port on the server access module (SAM).
2.Connect the remaining connectors to a compatible target computer.
3.2 Typical Applications
3.2.1 KV0081A or KV0161A
The SAMs work with the ServSwitch CX Uno, 8-Port (KV0081A), or ServSwitch CX Uno, 16-Port (KV0161A). They provide high- end, multiplatform KVM switching over CATx with remote access. Place the remote console up to 984.3 feet (300 m) away. The ServSwitch supports resolutions up to 1920 x 1200 at 60 Hz (when used at distances less than 328 feet [100 m]), and reads DDC EDID from the display to avoid plug-and-play issues.
984 ft. (300 m) or less
KV0161A
328 ft.
(100 m)
or less
Figure 3-1. Application diagram #1.
3.2.2 KV0424A-R2
The SAMs also work with the ServSwitch CX, (1) Local Console Port + (4) Users, (24) Servers (KV0424A-R2). Up to four users can access and control 24 multiplatform servers via CATx cable. The switch can support up to 1920 x 1200 resolution and can switch via on-screen menus. This ServSwitch is ideal for small and mid-size data centers.
KV04AS-REM
KV0424A-R2KV0424A-R2
Figure 3-2. Application diagram #2.
724-746-5500 blackbox.com | Page 17 |
