![](/images/new-backgrounds/1103529/10352919x1.webp)
Express Ethernet Switch LB9217A-R2 & Applicable Modules
LEDs & Reset Button
The array of LED indicators on the front panel conveys status and configuration information to help you monitor and troubleshoot the switch.
o Reset Button | q Port Status on |
|
nPower Z Port Status on
nPower
This LED comes on when the switch is connected to power and turned on.
oReset Button
If the switch should become unresponsive, you may reset it by pressing this button.
pPort Status on 8-Port Modules
The front panel of the
The LEDs are located at the left side of each section, displaying status for each respective port. Please refer to Table 1 for more details.
Table 1: Port Status
LED | State | Indication | |
|
|
| |
|
| A valid network connection | |
| Steady | established. | |
LNK/ACT |
| LNK stands for LINK. | |
| Flashing | Transmitting or receiving data. | |
| ACT stands for ACTIVITY. | ||
|
| ||
| Steady | Connection in full duplex mode. | |
| FDX stands for | ||
|
| ||
FDX/COL |
|
| |
Flashing | Collision occurred. | ||
| |||
| COL stands for COLLISION. | ||
|
| ||
|
|
| |
| Off | Connection in |
qPort Status on Single-Port Module
A set of two LEDs conveys the port status on the
10