Black Box pure networking gigabit media converters, LGC202A, LGC201A 4.1.2 LGC200A, Installation

Chapter 4: Installation

4.1.2 LGC200A

Plug the SFP module into the LGC200A as shown in Figure 4-2.

Figure 4-2. Plug the SFP module into the LGC200A.

Device A	Twisted-pair	Twisted-pair		Device B
	cable		cable

LGC200A,

LGC200ALGC201A or LGC202A

Multimode or single-mode fiber optic cable

Figure 4-3. Transmits and receives data between two LGC200A converters

or one LGC200A and one LGC201A/LGC202A.

NOTE: Two LGC200A with the same SFP modules can be used in pairs.

NOTE: LGC200A could be connected to LGC201A or LGC202A; however, the SFP module in the LGC200A must use the same mode and wavelength as the opposite end. The fiber connectors depend on the type of SFP installed. See Table 4-1.

724-746-5500 blackbox.com Page 19