Black Box LGC202A, LGC201A, LGC200A manual Force/Auto Switch, Operation, Page

Chapter 5: Operation

Table 5-1. LED functions.

Name		Status	Description
PWR		ON	Power to the chassis is ON.
		OFF	Power to the chassis is OFF.
		ON	There is a valid link.
FX	Link	Flashing	The converter is receiving or transmitting
			data from the fiber optic connector.
		OFF	There is no valid link.
		ON	There is a valid link.
	Link	Flashing	The converter is receiving or transmitting
			data from the TP port.
TX
		OFF	There is no connection on the port.
		ON	The TP port is connected to 1000BASE-TX.
	RX
		OFF	The TP port is not connected.

5.2 Force/Auto Switch

The DIP switch on the side of the converter sets force or autonegotiation mode.

Figure 5-2. Force/Autonegotiation switch.

In a back-to-back setup, set the two converters that are on opposite ends to Force mode. When connected to other products, such as switches, set the converter to auto-negotiation mode.

Page 24 724-746-5500 blackbox.com